PPC & Advertising

How Should You Set Your Bids by Placement on Amazon?

The placement with the best ACOS is rarely the one that pays for your campaign. Read the placement report against what a click is worth to you in each placement, then set the three percentages from that.

AmazeBase 10 min read PPC & Advertising

One base splitting into three glowing channels: two blue paths to small bar charts and one amplified gold path to a larger chart

You raise your top of search adjustment to see if sales grow. Two weeks later nothing has moved, so you open the placement report and see that rest of search has a far better ACOS. You set top of search back to zero, raise the other two, and within days your sales fall hard.

Nothing broke. You judged three placements by one number, and that number describes efficiency, not size. This guide shows how to read the placement report against what a click is worth to you in each placement, and how to turn that into the three percentages.

01Where do your Sponsored Products ads appear?

Amazon groups the positions a Sponsored Products ad can win into placements. Three of them take a bid adjustment. Top of search (first page) is the row of sponsored results above the organic results on the first page of a search. Rest of search is every other sponsored position inside search results, including further pages. Product pages are the sponsored slots on a product’s detail page.

Amazon reports a fourth group, Amazon Business placements, in the same Placements tab. It covers ads shown to business buyers, and many sellers can ignore it.

Each placement is a different auction with different shoppers. Someone scrolling the first page of a search is still choosing. Someone on a competitor’s detail page has already picked a product and is checking alternatives. So the same click can cost a different amount, and convert at a different rate, in each one.

The distinction

A placement is where the ad appeared, not what the shopper typed. The same keyword can win clicks in all three placements on the same day, at three different prices.

02What does a placement adjustment actually change?

An adjustment is a percentage added to your bid for one placement only. Amazon allows up to 900% on each of the three, which can make the bid there ten times what you entered. You set it in the campaign’s settings, and Amazon calls the number you typed against each keyword the base bid.

  • Base bid you entered$1.00
  • Top of search adjustment40%
  • Bid competing at top of search, $1.00 multiplied by 1.40$1.40
  • Rest of search adjustment0%
  • Bid competing at rest of search$1.00
  • Product pages adjustment0%
  • Bid competing on product pages$1.00
The trap

Zero percent does not switch a placement off. It removes the extra you were paying there and leaves your base bid. If the 40% was what won you the top of search auctions, setting it to zero hands those auctions to the advertisers who still pay more.

An adjustment can only add. Amazon describes it as a percent increase to your base bid, so no adjustment can take a placement’s bid below the base. That has a practical consequence: to pay less in one placement you lower the base bid, then raise the adjustment on the placements you want to keep.

The adjustment also belongs to the campaign, not to the keyword. Every keyword in the campaign gets the same three percentages. Our guide to Amazon’s suggested bid explains why that is a strong argument for few keywords per campaign.

03Why is the best ACOS rarely the placement you can scale?

ACOS is ad spend divided by ad sales. It tells you how much of each sale went to advertising. It tells you nothing about how many sales the placement can produce.

Take one campaign selling a $30 product. After the referral fee, the FBA fee and the landed cost, one sale leaves $12.50 before advertising. This is 30 days of its placement report.

PlacementClicksSpendOrdersSalesACOS
Top of search400$48048$1,44033.3%
Rest of search120$729$27026.7%
Product pages250$1258$24052.1%
Whole campaign770$67765$1,95034.7%

Rest of search has the best ACOS. Now count what each placement left after paying for its own clicks.

  • Top of search, 48 orders multiplied by $12.50, less $480 of spend$120.00
  • Rest of search, 9 orders multiplied by $12.50, less $72 of spend$40.50
  • Product pages, 8 orders multiplied by $12.50, less $125 of spend-$25.00
  • Whole campaign$135.50

Top of search earns three times what rest of search earns, with the worse ACOS. It carries 48 of the campaign’s 65 orders. Rest of search is more efficient, but it is small, and raising its adjustment does not make shoppers search more.

The rule

Judge a placement by the profit it leaves and the orders it carries, not by its ACOS alone. A good ACOS on a small placement cannot replace the profit of a large one.

04How do you read the placement report against your own numbers?

The report is in Campaign Manager, under the campaign’s Placements tab, and you can download it. For each placement take three figures over the same window: clicks, spend and ad-attributed orders. Use at least 30 days.

From them compute two numbers per placement. The cost per click you actually paid is spend divided by clicks. The ad conversion rate is orders divided by clicks.

Then the number that matters: the most a click in that placement can be worth to you. It is your contribution per unit multiplied by that placement’s ad conversion rate. At that price a sale costs you exactly the $12.50 it brings, so this is break-even, not a target.

PlacementCost per click paidAd conversion rateBreak-even cost per clickVerdict
Top of search$1.2012%$1.50Profitable, $0.30 of room
Rest of search$0.607.5%$0.94Profitable, $0.34 of room
Product pages$0.503.2%$0.40Losing $0.10 on every click

Break-even for rest of search is $12.50 multiplied by 7.5%, which is $0.9375, rounded to $0.94.

The test

For each placement ask one question: is the cost per click I paid below what a click there is worth to me? Below means it pays for itself. Above means every extra click loses money, however good the sales look.

05How do you set the three percentages?

Work from what each placement can afford, not from what it earned last month. With the numbers above, product pages lose money: the $0.50 paid per click there is above its $0.40 break-even. Because an adjustment cannot go below zero, the only way to pay less there is to lower the base and lift the other two.

  • Target bid on product pages, below its $0.40 break-even$0.35
  • New base bid, which becomes the product pages bid$0.35
  • Target bid at top of search, below its $1.50 break-even$1.30
  • Top of search adjustment, $1.30 divided by $0.35, minus 1271%
  • Target bid at rest of search, below its $0.94 break-even$0.80
  • Rest of search adjustment, $0.80 divided by $0.35, minus 1129%

The targets sit below break-even on purpose. The gap between them is the profit you keep on each click, and how big it should be is your decision, not Amazon’s.

What to do
  1. Write down the date and the current base bid and three percentages.
  2. Change one thing at a time: the base, or one adjustment, not all four at once.
  3. Wait until each placement has collected enough clicks to say something before you judge it.
  4. Compare the new cost per click paid in each placement against its break-even, as in the table above.
  5. Recompute the break-even whenever your price, costs or ad conversion rate move.

On how long to wait, how much data you need before you change a campaign applies placement by placement. One day is never enough, and a placement with few clicks needs longer than one with many.

06Why did your sales fall when you turned a placement down?

Because the sales that disappear are the ones that came from that placement, and for most campaigns that is top of search. In the report above, setting top of search to zero risks most of its 48 orders. Rest of search had 9 orders to offer, and even doubling them would not fill the gap.

There may be a second, slower effect. Amazon’s own published search research, covered in our article on the honeymoon period, describes ranking that learns from how shoppers respond to a product, purchases included. If your sales on a keyword drop for weeks, your organic position on it can slip too. That does not happen from one day to the next, so a collapse within days is almost always the first effect, not the second.

The asymmetry

Cutting a placement removes its orders at once. Raising another placement adds orders only as fast as that placement has shoppers. You lose faster than you can replace.

07What do you do when the budget runs out after the change?

Higher adjustments usually mean more clicks, and more clicks spend the daily budget sooner. If the campaign now runs out of budget in the afternoon, there are two different answers, and the placement report decides between them.

If every placement you are paying for is below its break-even, each click leaves profit, so raising the budget raises profit. More spend is the point. If some placement is above its break-even, more budget only buys more of that loss. Lower its bid first, by lowering the base or that placement’s adjustment.

The test

Before raising a budget, check two things. Do you have the cash to keep spending at the higher rate? And if a placement runs at a loss, is that loss buying you something you can measure, such as a better organic position on the keyword? If you cannot answer the second, treat the loss as a loss.

Our guide to a budget that runs out by midday covers what Amazon does when a budget runs out, and why spreading it thin can cost more than it saves.

08How do placement adjustments stack with dynamic bidding?

The bidding strategy is a separate campaign setting, and it can also change the bid before it enters the auction. Under dynamic bids - up and down, Amazon states it may raise your bid by up to 100% for all placements, so a bid can double before it enters the auction. Amazon also says placement adjustments work together with the bidding strategy to set the final bid, but it publishes no formula for how the two combine.

So under up and down you cannot calculate your real maximum at each placement. You can only see what you paid afterwards. While you are setting placement percentages, that is a reason to run the campaign on dynamic bids - down only or fixed bids: then the bid entering the auction is never more than your base bid plus your adjustment.

The risk

If your cost per click in one placement comes back well above base bid plus adjustment, check the bidding strategy before you touch the percentages. Up and down can be doing the raising, and you would be correcting the wrong setting.

09What is the case against tuning by placement?

There is a real one, and it has three parts.

The data per placement is thin. A campaign with 65 orders a month splits them three ways, and 8 orders on product pages is too few to set a percentage from with any confidence. Small campaigns may do better changing the base bid and leaving placements alone until there is volume.

The adjustment is campaign-wide. If one campaign holds keywords that behave differently, one set of three percentages serves none of them well. Tuning by placement only works once the campaign holds similar keywords.

And the report shows ad-attributed orders only. If top of search visibility also lifts your organic sales, the report does not show it, so top of search may be worth more than its ACOS suggests. It may also be worth less: nothing in the report proves that lift exists for your product. Treat it as a reason to be careful when cutting top of search, not as a reason to overpay for it.

Frequently asked

Does setting a placement adjustment to 0% stop my ads showing there?

No. Your ads still compete in that placement at your base bid. You only stop paying extra for it, so you win fewer of its auctions.

Can I bid less on product pages than on search?

Not with an adjustment, because adjustments only add to the base bid. Lower the base bid to what product pages can afford, then raise the top of search and rest of search adjustments to bring those placements back up.

Which placement should have the highest adjustment?

The one where a click is worth the most to you: highest ad conversion rate multiplied by your contribution per unit. For many products that is top of search, but your placement report decides it, not a rule of thumb.

How long should I wait before judging a new placement adjustment?

Long enough for each placement to collect a meaningful number of clicks, which is usually weeks, not days. Change one setting at a time so you know which change caused what you see.

Why is my cost per click higher than my bid plus the adjustment?

Check the bidding strategy. Dynamic bids - up and down can raise the bid by up to 100% on top of everything else. Under down only or fixed bids it should not exceed your base bid plus the adjustment.

Final thoughts

Placement adjustments look like a dial for efficiency. They are really a dial for where you buy clicks, and each placement sells a different number of them at a different price. Turn by ACOS alone and you will move money toward the smallest, cheapest placement and away from the one that pays the bills.

The method here is slow on purpose: a break-even per placement, one change at a time, and enough clicks before a verdict. It will not find the perfect percentages. It will stop you cutting the placement that was carrying your campaign, and that is the expensive mistake.